Welcome to Prosurge Lightning and Surge Protection manufacturer and solution provider!
Products

MOV technology - Type 1+2, 12.5kA (10/350) pluggable surge protective device

Product Name: MOV technology - Type 1+2, 12.5kA (10/350) pluggable surge protective device
Part Series: BPS12.5V series (Type 1+2 pluggable type lightning arrester)
Application: The main use of BPS12.5V arrester is in industrial and administration buildings, schools, supermarkets and cathedrals.
Description: BPS12.5V is lightning and surge arrester type 1+2 according to EN 61643-11. These are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0 – 1. Pluggable type with compact size of 18mm per pole.

Features of BPS12.5V SPD:

Type 1+2 surge arrester designed for low-voltage power supply system protection against surges at the boundaries from lightning protection zone 0B -1 and higher.

Ø  Class I+II (B+C) arrester in accordancewith IEC61643-11, UL1449-4th.

Ø  Small size of 18mm plug-in SPD module, easyfor maintenance

Ø  High impulse current of 12.5kA10/350 permode

Ø  Max surge capability 80kA 8/20 per mode

Ø  Reliable supervision due to disconnection device.

Ø  Fault indication by red indication flag inwindow.

Ø Fast response and with remote alarm terminal optional.

Model description:


Technical specification:

In accordance with

IEC61643-11:2011; UL1449-4th

Category IEC/VDE

I+ II / B+C

Max. continuous operating voltage V(AC/DC)

150

/200

175

/225

275

/350

Nominal discharge current(8/20) In

25kA

Max. discharge current(8/20) Imax

80kA

Lightning impulse current(10/350) Iimp

12.5kA

Voltage protection level

@In

<1.0kV

<1.0kV

<1.5kV

@VPR

<0.5kV

<0.6kV

<1.0kV

Response time

≤25 ns

Follow current

No

Backup fuse(only required if not already provided in mains)

200A gL/gG

Operating temperature range

- 40ºC ~ + 80ºC

Cross-section of connection wire

Single-strand 35mm2; multi-strand 25mm2

Mounting

35mm DIN-rail in accordance with EN 50022/DIN46277-3

Enclosure material

thermoplastic; extinguishing degree UL94 V-0

Degree of protection

IP20

Installation width

1 module per pole, DIN 43880

Thermal disconnector

Internal   red - failure

Remote alarm contact

Optional

Approvals, Certifications

CE

Additional data for Remote Alarm Contacts

Remote alarm contact type

Isolated Form C

Switching capability Un/In

AC: 250V/0.5A     DC: 250V/0.1A; 125V/0.2A; 75V/0.5A

Max. Size of connecting wire

Max. 1.5mm2(or # 16AWG)


Modular combination guide:

1P: BPS12.5V7V/150-S, BPS12.5V/175-S, BPS12.5V/275-S: Prosurge  HIT Class I+II / Class B+C / Type 1+2  Surge Protective Device, MOV technology, Uc 150Vac ~ 275Vac,  Imax 80kA 8/20, Iimp 12.5kA 10/350, with remote contact, pluggable design with compact size of 18mm per pole


NPE: G25PS/255NPE, G50PS/255NPE: Prosurge  HIT Class I+II / Class B+C / Type 1+2  Surge Protective Device, spark gap technology, Uc 255Vac,   Iimp 25kA~50kA 10/350, pluggable design with compact size of 18mm per pole, for N-PE only


PN: BPS12.5V/150-S/PN25, BPS12.5V/175-S/PN25, BPS12.5V/275-S/PN25: Prosurge  HIT Class I+II / Class B+C / Type 1+2  Surge Protective Device, Uc 150Vac ~ 275Vac, Iimp 12.5kA 10/350 L-N, Iimp 25kA 10/350 N-PE, with remote contact, 1+1 single phase surge arrester, equivalent of Iskra INPROTEC VS (R) series and Phoenix Contact's VAL-MS-T1/T2 .../12.5/1+1-FM, OBO's V50-B+C 1+NPE+FS SPD,  it is combination of 1 x  BPS12.5V + 1 x G25PS/255NPE


2P: BPS12.5V/150-S/2P, BPS12.5V/175-S/2P, BPS12.5V/275-S/2P, : Prosurge  HIT Class I+II / Class B+C / Type 1+2  Surge Protective Device, MOV technology, Uc 150Vac~275Vac, Iimp 12.5kA 10/350, with remote contact,  pluggable design with compact size of 18mm per pole,  it is combination of 2 x BPS12.5V


3P: BPS12.5V/150-S/3P, BPS12.5V/175-S/3P, BPS12.5V/275-S/3P: Prosurge  HIT Class I+II / Class B+C / Type 1+2  Surge Protective Device, MOV technology, Uc 150Vac~275Vac, Iimp 12.5kA 10/350, with remote contact, 3+0  three phase surge arrester, it is combination of 3 x BPS12.5V, replacement of OBO's V50-B+C 3 SPD.


4P: BPS12.5V/150-S/4P, BPS12.5V/175-S/4P, BPS12.5V/275-S/4PProsurge  HIT Class I+II / Class B+C / Type 1+2  Surge Protective Device, MOV technology, Uc 150Vac~275Vac, Imax 80kA 8/20, Iimp 12.5kA 10/350, with remote contact, 4+0  three phase surge arrester, it is combination of 4 x BPS12.5V


3PN: BPS12.5V/150-S/3PN50, BPS12.5V/175-S/3PN50, BPS12.5V/275-S/3PN50Prosurge  HIT Class I+II / Class B+C / Type 1+2  Surge Protective Device, Uc 150Vac ~ 275Vac, Iimp 12.5kA 10/350 L-N, Iimp 50kA 10/350 N-PE, with remote contact, 3+1 three phase surge arrester,  pluggable design with compact size of 18mm per poleit is combination of 3 x  BPS12.5V + 1 x G50PS/255NPE


Dimension & circuit diagram: